Chart Synchronization - Raymarine E120W Reference Manual

Chapter 5: 3D Chart

Chart synchronization

Chart synchronization enables you to synchronize the heading, range and position
information on the 2D and 3D charts.
When chart synchronization is ON, please note the following:
• The 2D-3D synchronization is shown in the status bar of the applications.
• Soft key options that are not available with this feature are "grayed" out.
• Pressing FIND SHIP from any synchronized application, will return the 3D chart to
the default active motion mode view and synchronize the 2D chart to the same view.
• Any changes made to the heading, range or position in either 2D or 3D charts will
be displayed in both 2D and 3D windows.
• If the 2D chart view for the current window is set to SYSTEM and you have multiple
windows on a page/more than one display, any changes made to a chart will be
reflected in all windows in all displays.
• If the 2D chart view for the current window is set to LOCAL, no other windows will
be affected.
• You can synchronize the 2D chart with the 3D chart or the radar but not both.
To synchronize the 2D and 3D charts:
Chart application active
CHART MODE AND
PRESENTATION
ORIENTATION...
113
CHART SYNC
RDR 3D OFF