Following Route Plans - Raymarine GPS navigation Operation Manual

When you have completed the entry of all the waypoints for a particular
route plan, just press thewqkey. The new route plan will be stored and
the display will promptly return to the last used Display mode.
3.9.2 FollowRoute Plans
Once a route plan has been made and saved into I/
memory, it can be recalled to Followed or to be Edited.
Press
appear. Press theI- softkey.
FOLLOW ROUTE
use the numeric keys to type the number of the route
FOLLOW.
plan to
Example Press 4,lm(for route plan # 4.
The FOLLOW ROUTE
route plans have been made, this screen permits en-
gagement of route sequence operation.
sequencing mode between
route sequence mode to OFF. Press
light the desired sequencing mode.
AUTO SEQUENCING
next when the arrival perpedicular
In MANUAL SEQUENCING
operator will manually press the-1 key to step to the next leg in the
route plan when it is safe to do so.
When the Sequencing mode is decided, the next
step is to decide to follow the route in the Forward
direction (first to last), or to follow the route in Re-
verse (last to first). Just press the/mor//qdirec-
tion softkey to advance to the next screen.
The last display shows the Arrival alarm distance that
will be used to alert you as each waypoint is ap-
proached. You may accept the limit by pressing thd=lkey or enter a
limit of your choice on this screen. To enter a new arrival zone limit, type
the numbers of the desired limit distance and press the/e[key.
OPERATION 3-32
Selector screen appears
Setup screen appears. Once
or
AUTO MANUAL
mode automatically steps from one waypoint to the
point has been detected.
mode, the unit sounds the arrival akrn and the
screen will
SEQUENCE MODE 4
. The other choice turns the
FOLLOW ROUTE
SET ARRIVAL DISTANCE
PRESS ENT TO END
to high-
4 1