Setting Up The 3D Chart - Raymarine E120W Reference Manual

Chapter 5: 3D Chart
... via the waypoint list
GOTO...
Please refer to Section 3.4, Navigating to a waypoint, for full details.
Note:
... using the follow route option
GOTO...
Please refer to Section 4.10, Building and following a route, for full details.
Note:
REMEMBER: A route can only be edited using a 2D chart. Changes made on the 2D
chart are also shown on the 3D chart.

5.15 Setting up the 3D Chart

The set up for your 3D chart can be changed from the standard configuration to suit
your particular needs. Although you will probably only do this when you first use the
chart, you may decide to make subsequent adjustments once you become more
familiar with the system. Any settings that you change are retained at power off.
To select the 3D Chart Setup Menu:
MENU
This menu lets you change:
FUNCTION
Description
Centre-of-view indicator
Centre-of-view indicator (marked with a white cross)
Vessel symbol
Style of boat symbol displayed on-screen.
GOTO WAYPOINT
OPTIONS ...
FOLLOW ROUTE
OPTIONS ...
Centre-of-View Indicator
Setup
Vessel Symbol
3D Chart Setup...
Aerial Photo Overlay
Chart Text
Nav. Marks
Highlight 3D Chart
Setup menu
Enter 3D Chart
Setup menu
Waypoint List
Select required waypoint
Route List
Select required route
3D Chart Setup Menu
ON
Power
ON
ON
ON
Highlight required function
Enter function
OPTIONS
(Default in bold)
ON
OFF
Sail
Power
115
GOTO WAYPOINT
FOLLOW ROUTE
e.g.
ON
OFF
Change
status as
required