Chapter 4: Using the Chart
The waypoint and its dotted line are removed from the screen and the cursor moves
back to the previous waypoint. If you repeatedly press these keys, successive
waypoints are removed.
Delete a waypoint from the new route list
If you insert a waypoint incorrectly into a route that you are building via the waypoint
list, you can remove it:
Make Route
Waypoints
Crag Rock
Blyth Bay
Sandy Bay
Highlight incorrect
waypoint
To abandon the route build
To cancel the route that you are currently building (on-screen or via the waypoint list):
CANCEL
Saving routes
Once you have built your route either on screen and/or via the waypoint list you have
the option to either:
• Save and immediately follow the built route (Quick Route)
• Save the built route for later use (and rename it if required).
Quick routes
A route that is saved and immediately followed is referred to as a Quick Route. If a
Quick Route already exists, it is overwritten unless you rename it (see
FOLLOW (QUICK)
ROUTE
To save the built route for later use
o
SAVE ROUTE...
For further details on editing a dialog box, please refer to page 13
Note:
New Route
REMOVE
01 Sandy Bay
WAYPOINT
02 Crag Rock
03 Rush Creek
YES
Route saved under 'Quick Route'
Follow route commences
Save Route
Name
Route 1
Color
Make Route
New Route
Waypoints
Crag Rock
01 Sandy Bay
Blyth Bay
02 Rush Creek
Sandy Bay
Remaining waypoints close-up
and renumber accordingly
Or:
page 90
EDIT NAME
EDIT COLOR
Or:
To accept default
OK
71
).