What Can The E-Series Display Do - Raymarine E120W Reference Manual

2

1.2 What can the E-Series Display do?

With the appropriate equipment connected to your system and the necessary data
available, your E-Series display combines the following applications which are used to:
Chart (Chapter 4)
0.5nm North-Up
You will need a chart card, and position/heading data, for the chart application to be
fully functional.
3-D Chart (Chapter 5)
You will need a chart card and accurate heading and position data for your 3D chart
application to be fully functional.
Fishfinder (Chapter 6)
200kHz: Auto
TRANSDUCER
SETTINGS...
You will need position data, in addition to a DSM300, for your fishfinder to be fully
functional.
(Relative Motion) Local
Draft
Range: Auto
ZOOM... BOTTOM LOCK... A-SCOPE... PRESENTATION...
E-Series Networked Display Reference Manual
Locate where you are.
Interpret your surroundings.
Monitor where you are going.
Record where you have been.
Navigate to a specified position (waypoint).
Build and navigate routes.
View details of nearby features & services.
View details of boats equipped with AIS.
Distinguish between fixed and moving objects.
Measure distances and bearings.
Display a 3D view of land, sea & features.
Locate where you are.
Interpret your surroundings.
Monitor where you are going.
Go to an existing waypoint.
Navigate a route.
Synchronize with the 2D chart.
Identify fishing spots
Build a picture of what is below your vessel.
Locate & distinguish underwater objects & targets.
Distinguish the seabed and its texture.
Obtain information about water depth, temperature.
Mark a point of interest, fishing spot etc.
Determine depths and distances of targets.