Raymarine E120W Reference Manual page 95

Chapter 4: Using the Chart
To add a waypoint within a route:
RTE
Move cursor
over appropriate
leg of route
You can also use the method described on page 77, to add a waypoint within a
Note:
route.
Add a waypoint(s) to the end of a route
This option inserts a waypoint (or series of waypoints) at the end of a route in order to
extend its existing course. You can create new waypoints for this purpose and/or use a
waypoint that already exists in the system.
1. Select the appropriate route for editing (see
2. Select the amend route course option:
AMEND ROUTE
COURSE...
3. Define new or existing waypoint:
Define new waypoint
Use existing waypoint
INSERT
WAYPOINT
3
1
Drag cursor to required position for
additional waypoint
Or:
USE WAYPOINT
LIST...
RTE
Stretch to
position for
new waypoint
page 76
).
RTE
2
Make Route
Waypoints Sunday tour
Harbour Ent. 01 Midchannel
Midchannel 02 Outer Harbour
Outer Harbour 03 Harbour Ent.
Pierhead
Waypoint 4
0 0
50 16'.75N 50 47'.356N
0 0
001 6'.095W 001 6'.604W
Select waypoint for insertion.
79
PLACE
WAYPOINT
Route course changes
Route index re-
numbers