Initial Setup Procedures; Selecting The Data Master (Networked E-Series Only); Setting The Language, Date/Time Format And Units Of Measurement - Raymarine E120W Reference Manual

Chapter 2: General Operation

2.6 Initial setup procedures

When you first use your E-Series Display after it has been commissioned (see
Installation Guide), we recommend that you carry out the following:
• Selecting the data master (Networked E-Series Displays only).
• Set the language, the date and time format and preferred units of measurement.
• Select a page set.
• Select an application page/window.
• Adjust the display lighting.
Note: For full details of all System Setup options, please refer to Chapter 14:System set-
up and customizing. For application specific set up options, please refer to the appro-
priate chapter.

Selecting the data master (Networked E-Series only)

When a Networked E-Series system is powered on for the first time, an alarm will
sound and you will be asked to nominate which display is to be the data master. For
details of how to change the data master, please see
Setting the language, date/time format and units of mea-
surement
To adjust the language, date/time format and units of measurement to your preferred
settings:
1. Select the setting:
MENU
2. Adjust the setting:
3. Repeat this process until you have changed all of these settings.
Setup
System Setup...
Alarm Setup...
Highlight
System Setup
Enter System
Setup
e.g.
Date/Time Setup Menu
Date Format mm/dd/yy
Time Format 12hr
Local Time Offset UTC
Change value as
or
required
page 28
.
System Setup Menu
Position Made Lat/Lon...
Date/Time Setup...
Units Setup...
System Integration Setup...
Waypoint Password Setup...
Highlight required
setting
Enter setting
mm/dd/yy
OK
dd/mm/yy
15