Chapter 3: Working with Waypoints
Stop navigating to a waypoint
If at any time you wish to stop navigating towards the selected waypoint:
WPTS/
MOB
Or:
WPT
Position cursor over
active waypoint.
Once navigation is no longer active, the waypoint symbol returns to its normal
unboxed state and the dashed line between your boat and the waypoint is removed.
3.5 Viewing waypoint information
You can view the details of any waypoint that you have placed, by either selecting it
with the cursor (in radar and chart windows) or by selecting it on the waypoint list.
Once you are viewing a waypoint's details, a variety of editing and managing options
are available.
You can also display navigation details for the active waypoint in the data bar (see
page 259
...using the cursor
To view the details of a waypoint that is not active.
Position cursor
over waypoint
Details of the waypoint that you are currently navigating to, can be accessed via
Note:
the waypoint list as described below.
...using the waypoint list
The waypoint list shows all the waypoints that have been placed (including the active
one), and displays details of the selected waypoint:
Temperature and depth are only captured (if available) for waypoints placed at
Note:
your vessel's position.
GOTO WAYPOINT
GOTO WAYPOINT
WPTS/
OPTIONS...
MOB
OPTIONS...
STOP GOTO
WPT
Position cursor over
active waypoint.
).
EDIT WAYPOINT
WPT
STOP GOTO
STOP GOTO
Or
STOP GOTO
Edit Waypoint
Waypoint details displayed
37
OK
To exit way-
point list