Initial Power On Test - Raymarine E90W Installation Instructions Manual

5.1 Initial power on test

Touchscreen overview
The touchscreen provides a quick way of performing many common
functions.
Some of the functions you can operate with the touchscreen include:
• Accessing applications.
• Adding and editing applications pages.
• Placing and editing waypoints.
• Building routes.
• Panning the chart display.
• Placing and moving the cursor.
• Placing and moving VRMs and EBLs.
Note: Raymarine strongly recommends that you familiarize
yourself with touch operations while your vessel is anchored
or moored. You may find it helpful to use the simulator mode
(accessible from Menu > System Setup Menu) in these
situations.
Note: To disable the audible "beep" that you hear when you touch
the screen, go to Menu > Display Setup > Touch beep.
UniControl
The UniControl provides a number of key functions in a single
control.
54
1. Rotary Control. Use this to select menu options and adjust the
value of various items.
2. Trackpad. Use this to select menu items, options and move
the cursor.
3. OK button. Use this to confirm a selection or entry.
Powering the display on
1. Press and hold the POWER button until the Raymarine logo
appears.
2. Press OK to acknowledge the warning window.
E-Series Widescreen installation