Fitting The Plinth; Oven Check; Customer Care - Rangemaster Professional 110 Dual Fuel Users Manual & Installation

Installation instructions
Hide thumbs Also See for Professional 110 Dual Fuel:
Table of Contents

Advertisement

Oven Light
Press the oven light switch and check that the light is
working.
NB. The oven light bulb is not included in the
guarantee
Hotplate
Check each burner in turn. Push in tap and turn to the
large flame symbol. Press ignition switch on facia
panel.
Grill
Open the grill compartment door. Turn on the grill
control and check that the grill heats up.

Oven check

The clock must be set to the time of day before the
ovens will work.
Press and hold as above.
At the same time, press - or + until the correct time
shows.
Don't forget it's a 24 hour clock.
If you make a mistake or press the wrong button, turn
off the power supply for a minute or two and start
again.
Turn on the oven and check that the oven fan starts to
turn and that the oven starts to heat up. Turn off the
oven.

Fitting the plinth

Loosen the 3 screws along the front bottom edge of the
cooker. Hook the central keyhole over the central
screw. Twist and fit each end keyhole over their
respective screws. Tighten the fixing screws.

Customer care

Please complete your details in the inside cover of this
Guide. Then replace this Installation Guide back in the
Customer Care Pack in the correct position. Please
inform the user how to operate the cooker and hand
over the Customer Care Pack.
Thank you.
28

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents