Table of Contents
Advertisement
[Setup via recorder's main monitor]
About the removal process and the link process of hard disk
drives
When replacing hard disk drives, it is necessary to perform the removal process/ the link process.
Remove the HDD [Remove HDD]
Step 1
Click [Execute >] on the [Remove HDD].
→ The HDD removing screen will be displayed.
→
Add the HDD [Add HDD]
Step 1
Click [Execute >] on the [Add HDD].
→ The HDD adding screen will be displayed.
→
Important:
• When the link process is performed, the data will be erased.
Step 2
Check the HDDs to remove, and click the [Start] but-
ton.
The HDDs can be removed when "OK" is displayed in
the "Results" field. Click the [Back] button.
Note:
• If a password is assigned for HDD viewer, the
HDD is also assigned with a password.
Step 2
Check the HDDs to add, and click the [Start] button.
The process is completed when "OK" is displayed in
the "Results" field and the HDDs are ready for record-
ing. Click the [Back] button.
74
Advertisement
Table of Contents
