Table of Contents
Advertisement
[Operation via recorder's main monitor]
Use digital zoom
Images on the 1-screen or 4-screen of the control screen, or the 1-screen in wide view can be digitally zoomed.
It is also possible to move the zoomed area within the displayed image.
Displaying images on a control screen
Note:
• Digital zoom is not available on the 9-screen/16-screen.
• To use this function on the 4-screen, do so after first selecting the desired camera image. To select a cam-
era, click the camera number panel or the camera image. Once a camera has been selected, the selection
frame will be displayed around the camera image.
Step 1
Confirm that the image display area is displayed on
the 1-screen or 4-screen.
(when displaying on the 4-screen, select the camera
whose image is to be zoomed)
Step 2
Click the digital zoom buttons
→ The displayed image will be enlarged ×1, ×1.25,
→
×1.50, ×1.75, ×2, ×2.5, ×3, ×3.5, ×4, ×5, ×6, ×7, ×8
centering on the center point of the screen.
Digital zoom buttons
Note:
• Clicking a point in the zoomed image makes the
clicked point the center of the image.
Displaying images on a wide view
Step 1
Confirm that the image display area is set to the
1-screen.
Step 2
Use the mouse wheel.
→ Zooming is switched by ×0.25 from ×1 to ×2, by
→
×0.5 from ×2 to ×4 and by ×1 from ×4 to ×8 cen-
tering the position of the mouse cursor.
Click of the image during zoom display changes the
center to the clicked position.
.
Step 3
Click the digital zoom button
image by the magnification opposite to the Step 2.
Note:
Note:
115
• If "Enable camera control with mouse" on the
camera control panel (☞ Page 117) is not
checked, the digital zoom factor can also be
changed by placing the cursor on the image in the
image display area and turning the mouse wheel.
In this case, the point where the mouse cursor is
positioned will become the zoom center.
• If the image resolution is too small compared with
the size of the image display area, the digital zoom
levels off and the image cannot be displayed at the
assigned magnification.
• Digital zoom is automatically canceled by other
operations such as selecting another camera or
changing the screen pattern.
• The magnification is displayed around the camera
title during the zoom display. If the camera title is
not displayed, the zoom magnification will not be
displayed. You can set whether to display the
camera title in the [Main monitor] tab of the moni-
tor page. (☞ Page 47)
• Digital zoom is automatically canceled by other
operations such as selecting another camera or
changing the screen pattern.
• If the image resolution is too small compared with
the size of the image display area, the digital zoom
levels off and the image cannot be displayed at the
assigned magnification.
to zoom out the
Advertisement
Table of Contents
