Table of Contents
Advertisement
[Operation via recorder's main monitor]
Emergency recording
The recording is manually done using a switch connected to the "Emergency recording input" terminal of the
"ALARM/CONTROL connector" on the back side of the recorder when the emergency occurs. For example,
you can install a switch into the reception of the store and press the switch for the emergency recording when a
suspicious person appears.
Important:
• The emergency recording records all images of all the connected cameras.
Step 1
Press the switch connected to the "Emergency
recording input" terminal.
→ The emergency recording will start.
→
Step 2
The emergency recording will automatically be termi-
nated when the recording time set for the emergency
recording is over.
Set the recording time of emergency recording at
"Recording time of emergency recording" of "REC &
event" - "Advanced setup" tab on the setting menu.
Note:
• The emergency recording is the most prioritized
recording mode. The emergency recording will be
prioritized even if recording is being done on
another recording mode.
• Press the "Alarm reset" button to stop the record-
ing if "Recording time of emergency recording"
setting (☞ Page 44) is "Ext."
131
Advertisement
Table of Contents
