Table of Contents
Advertisement
[Setup via recorder's main monitor]
[Emergency]
Set the frame rate of the emergency recording.
1 ips/ 3 ips/ 5 ips/ 10 ips/ 15 ips/ 25 ips/ 30 ips/
(Same as the basic)
Default: Same as the basic
Note:
• If the rate of the basic settings is 50 ips or 60 ips, the
settings of the event recording and the emergency
recording will be the same as the rate or the basic
setting and displayed as "Same as the basic". In this
case, the settings of the event recording and
emergency recording cannot be changed.
• The rates of recorded images set to 5 ips/ 10 ips/
15 ips become 4.2 ips/ 8.3 ips/ 12.5 ips
respectively if any of the basic setup, the event
recording or the emergency recording of the same
camera is set to 25 ips.
• If the SD backup rec. or the SD recording function
of the camera is used, set the frame rate of the
event recording and the emergency recording to
"Same as the basic".
Check the pre-event duration and availability of recording
You will be able to check the pre-event duration and availability of recording of each camera.
Clicking the [Advanced >] button on the [Recording setup] tab will open the advanced setup page.
Clicking the [View] button of "Display the pre-event
recording duration list" displays the pre-event record-
ing duration list.
[Referenced recording days] (☞ Page 36)
[Back] button
Click the button after completing the settings. The
screen returns to the [Recording setup] tab.
[Setting]
It displays the set pre-event duration.
[Estimate]
It displays the set time (second) if a camera is able to
record image during the set pre-event duration, and
time (second) with the red background if a camera is
not able to record image during the full set pre-event
duration.
[Close] button
The screen returns to the Advanced recording setup
page.
39
Advertisement
Table of Contents
