[Operation via recorder's main monitor]
Step 4
Click the [Search] button.
→ This will run a VMD search within the designated
→
search range and display a list of results as follows.
It is possible to switch between list pages by
clicking the [Previous]/[Next] buttons.
[Change list size] button
Displays/Hides the list.
Note:
• Up to 100 logs are saved in the list. When more
than 100 logs are filed in the search result, "> 100"
will be displayed.
• The VMD search function searches the entire
camera image by default. To designate a search
area, click [Filtering] button and set the search
area on the filtering panel. (☞ Page 145)
• It may take some time until the search results are
displayed.
Step 5
Select the line with the desired list, and click the play-
back button on the playback operation panel.
(☞ Page 134)
→ Playback will start from the date & time selected.
→
Note:
• Playback can also be started by double-clicking
the desired date & time line.
Step 6
To stop playback and return to live images, click the
stop button on the playback operation panel.
→ Playback will stop, and live images will be dis-
→
played.
Change list size button
Note:
• Playback can also be stopped and live images
can also be displayed by the following operations:
• Clicking the [×] button on the date & time
operation panel (playback display)
• Clicking the [Live] button on the date & time
operation panel (playback display)
• Changing the playback medium
144