Table of Contents
Advertisement
[Setup via recorder's main monitor]
[Set password for HDD viewer]
Set whether you will assign a password to the HDD
mounted on the recorder. Setting it to "On" allows
you to set a password to the HDD when removing
HDD. When you use a HDD with a password set in
HDD viewer, you need to enter the password.
On: Sets a password for the HDD.
Off: Does not set a password for the HDD.
Default: Off
Important:
• Removing the HDD without the removal process
of the HDD (☞ Page 74), the password is not
set in the HDD.
[Password]
Assign a password for HDD viewer using the on-
screen keyboard. The password must be between
8-32 characters including the half-width alphanumeric
and the symbol. Use at least two types of characters
among alphabet, numbers and symbols. The set pass-
word will be displayed as "*****" regardless of what is
entered.
Important:
• If you forget the password of the removed HDD,
you cannot play back the HDD in HDD viewer.
[Retype password]
Enter the password that has been set for "Password"
again for confirmation.
[Save HDD viewer (to USB medium)]
Save HDD viewer to a USB medium (external storage
device). Click the [Execute >] button to display the
confirmation window to start saving. HDD viewer is
saved under the USB medium drive as a compressed
file (NX_HDD_Viewer.zip). Unzip the file to use it. The
operating instructions of HDD viewer are available on
the following Panasonic Support Website.
https://security.panasonic.com/download/
66
Advertisement
Table of Contents
