Table of Contents
Advertisement
[Connection test]
Click the [Execute >] button, the system starts the connection test and displays [Results/Free].
[Schedule setup of the NAS backup]
Click the [Setup >] button to set cameras to be backed up, a file format and a schedule.
(⇒Refer to "Configure the schedule settings")
[Current backup status]
Displays the storage destination connection status.
Normal (Storage-1), Normal (Storage-2) : Backup is available.
Error (No remaining capacity)
Error (Communication)
Blank
[Re-connect] button
Click the [Re-connect] button, the system starts the connection test with storage destination 1 and 2 and dis-
plays the connection status.
[Backup error history]
Click the [View >] button to display the backup error history screen.
If the backup did not complete on the backup execution date, the time range that could not be backed up will
be displayed at midnight on the next day.
[Recording date and time when the backup was interrupted.]
Displays the time range that could not be backed up.
[Log]
Displays the reason why the backup could not be done.
Not backed up yet (No remaining capacity) : The remaining capacity of the storage destination ran out dur-
Not backed up yet (Interrupted)
Not backed up yet (Failed)
No recording data in HDD
Click the [Back] button to close the backup error history screen.
: No remaining capacity on storage destinations.
: No communication available and storage destination is not
mounted.
: The NAS is invalid or has never been connected.
ing backup.
: The backup was not completed because the schedule period
expired, the backup stopped due to a setting change, etc.
: The backup stopped because an error occurred.
: There was no recorded data of the target date because it was
overwritten or the HDD broke down.
207
Advertisement
Table of Contents
