Table of Contents
Advertisement
[Operation via recorder's main monitor]
About the status display panel
Normal operation
In case of alarm/error (When the associated buttons are displayed)
①
① Status display area
Recorder status indications and their details are shown in the table below. In the event that the recorder
enters several statuses at the same time, these are displayed in their order of priority. If both statuses have
the same priority, the one that occurred last will be displayed.
Status
Live
During playback
Mirroring recovery/
RAID recovery
Downloading SD data
Copying
Formatting USB
In the alarm state
Emergency recording
In the error state
Displaying thumbnail
② Alarm buttons
Indicate that an alarm has occurred. Turn red in the alarm state. Clicking the buttons will toggle between
displaying/not displaying buttons such as the alarm log button and the alarm reset button.
③ Error button
Indicate that an error has occurred. Turn yellow in the error state. Clicking the buttons will toggle between
displaying/not displaying buttons such as the error log button and the error reset button.
④ Alarm log display button
The alarm log are displayed on the operation panel of the control screen. Up to 1000 alarm logs are saved.
When more than 1000 logs are filed, the older logs will be overwritten by the newer logs. In this case, the
oldest log is the first to be overwritten.
②
③
⑤
②
④
Description
Live images are being displayed.
Recorded images are being played.
Currently in the process of Mirroring/RAID recovery.
Indicates that SD memory data is being obtained from
camera.
Data is being copied. Copying progress is displayed in %.
USB medium is being formatted.
Indicates an alarm occurrence. Detailed information of the
alarm will be displayed.
Emergency recording is on.
Indicates that an error has occurred. A detailed description
of the error content will be displayed.
Thumbnail search screen is being displayed.
102
③
⑥
⑦
Example
Priority
6 (Low)
6
5
4
3
3
2
2
1
0 (High)
Advertisement
Table of Contents
