Table of Contents
Advertisement
Adjust the sensitivity of the network microphone
Step 1
Click the [Setup >] button of "Microphone sensitivity"
in the [Camera setup] tab.
Step 2
Set the "Microphone sensitivity", mark the "Select"
checkbox, and then click the [Transmission] button.
→ The setting will be applied to the selected micro-
→
phones, and transmission result will be displayed
in "Results".
[Microphone sensitivity]
Set up the sensitivity of each network microphone
according to the installation environment.
Microphone sensitivity: 0 High sensitivity/ 1/ 2/ 3
Default/ 4/ 5 Low sensitivity
[Transmission] button
Transmits the setting of the microphone sensitivity to
the network microphone. Once transmission is com-
pleted and the setting is applied to the network
microphone, "OK" will be displayed in "Results". If
the display reads "Authentication error", etc., the
microphone connection or the setting may have
failed.
[Back] button
Click the button after completing the settings. The
screen returns to the [Camera setup] tab.
200
Advertisement
Table of Contents
