England's Stove Works 55-TRPCB120 Installation & Operation Manual page 50

SIDE PANELS
The side panels are designed to hang onto the sides of the stove and can easily be removed
to perform regular cleaning (and any maintenance that may need to be done in the back of the
stove).
To remove side panels:
 Loosen (DO NOT REMOVE) the (2) 5/16" screws that hold the side panel to rear of the
stove.
 Grasp the panel and lift straight up until the tabs are removed from the side tracks and
pull the panel towards you.
 Re‐install the side panels using the reverse of this method.
FINISH
This new unit has been painted with High‐Temperature paint that should retain its original
look for years. If the unit should get wet and rust spots appear, the spots can be sanded with
fine steel wool and repainted. It is crucial that only High‐Temperature Spray Paint is used
(Part# AC‐MBSP), as others may not adhere to the surface or withstand the high temperatures.
Similarly, some brands of paint will not adhere to different brands of paint, so we highly
recommend using our proprietary High‐Temperature Spray Paint.
IMPORTANT! READ AND FOLLOW ALL INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING CLEANING THE UNIT AS SPECIFIED, AND
ENGLAND'S STOVE WORKS IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT, OR DUE TO UNSAFE INSTALLATION OR
REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED.
USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH ANY QUESTIONS.
50