Table of Contents
Advertisement
6.2.6
Overload operation
When this setting is selected, the power converter group can be operated in overload mode for
a limited time. The rated current limit can be exceeded as a result. In this operating mode, the
"weakest" power converter in the group (e.g. the one with the highest temperature) determines
the derating factor.
Figure 6-8
SIMOCRANE Energy Storage System Management V01.01
Operating Instructions, 04/2023, A5E51573536B AE
Overload operation
Control and engineering
6.2 Control via remote PLC
79
Advertisement
Table of Contents
