Indefaultbypass; Indefaulthighdynamic; Instartindividualmeas - Siemens SIMOCRANE Operating Instructions Manual

5.1.13

inDefaultBypass

This input can be used for configuring the "Bypass" function after startup of the ESS IF PLC:
• 0 = No Bypass
• 1 = Bypass
Table 5-33
Input
inDefaultBypass
5.1.14

inDefaultHighDynamic

This input can be used for configuring the "High Dynamic" function after startup of the ESS IF PLC:
• 0 = No High Dynamic
• 1 = High Dynamic
Table 5-34
Input
inDefaultHighDynamic
5.1.15

inStartIndividualMeas

You can use the local operator interface to start/stop and reset an individual timer and energy
meter.
Table 5-35
Input
inStartIndividualMeas
SIMOCRANE Energy Storage System Management V01.01
Operating Instructions, 04/2023, A5E51573536B AE
inDefaultHybrid
Data type
Bool
inDefaultHybrid
Data type
Bool
inStartIndividualMeas
Data type
Bool
Block interface
5.1 Inputs
Comment
The system starts with this func‐
tion by default.
Comment
The system starts with this func‐
tion by default.
Comment
Use this input to start the timer
and energy meter of the individ‐
ual measurement.
51