Installing The Speakers; Removing The System Board - Dell P52G Owner's Manual

Installing the Speakers

1. Insert the speakers into the chassis and press the retaining clips to lock in place.
2. Connect the speakers to the system board.
3. Install:
a) palmrest assembly
b) keyboard
c) memory module
d) hard drive
e) WLAN card
f) access panel
g) optical disk-drive
h) battery
4. Follow the procedures in

Removing the System Board

1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a) battery
b) optical-disk drive
c) access panel
d) hard-disk drive
e) memory module
f) keyboard
g) palmrest assembly
3. Disconnect the following cables from the system board:
a) speaker and power cable (1)
b) display (LVDS) cables (2)
4. Remove the screws that secure the system board to the chassis. Then, disconnect and remove the following:
a) I/O board cable (1) and (2)
b) LVDS cable (4)
After Working Inside Your computer.
Removing and Installing Components 19