Next steps
1. Replace the
display assembly
2. Replace the
hard drive assembly
3. Connect the battery cable to the connector on the system board.
4. Replace the
base cover
5. Replace the
SD memory card
6. Follow the procedure in
Power-button board
Removing the power button board
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
base cover
4. Disconnect the battery cable from the connector on the system board.
5. Remove the
WLAN
6. Remove the
system fan
7. Remove the
hard drive assembly
8. Remove the
display assembly
56
Removing and installing components
after working inside your computer
before working inside your computer