Table of Contents
Advertisement
340
SERVICING AND MAINTENANCE
4. When reinstalling carpet please perform these steps
in reverse order making sure that the carpet is
tucked under the scuffs, B-pillar, console, and refas-
ten grommets.
Cargo Carpet (Four Door Models) With Gap Hider:
1. Remove the grommets under the rear seat (one left
and one right).
2. Pull the carpet out to the front and open the carpet
split around the seat belt attachment and under the
center seat bracket.
Under Rear Seat
1 — Grommets
2 — Carpet Split
3. When reinstalling carpet please perform these steps
in reverse order making sure that the carpet is
tucked under the scuffs, B-pillar, console, and refas-
ten grommets.
Side Carpet (Four Door Models):
1. Remove the side grommet (one left and one right).
2. Pull the carpet out starting on the top flange, then
all around the perimeter and open the carpet split
around the seat belt attachment.
Inside Sidewall
1 — Top Flange
2 — Grommet
3 — Side Carpet
3. When reinstalling carpet please perform these steps
in reverse order making sure that the carpet is
tucked under the scuffs, B-pillar, console, and refas-
ten grommets.
Side Carpet (Two Door Models):
1. Remove the side grommet and then the lower one
(left and right).
2. Pull the carpet out starting on the top flange, then
all around the perimeter and open the carpet split
around the seat belt attachment.
3. When reinstalling carpet please perform these steps
in reverse order making sure that the carpet is
tucked under the scuffs, B-pillar, console, and refas-
ten grommets.
SEATS AND FABRIC PARTS
Use Mopar® Total Clean to clean fabric upholstery and
carpeting.
WARNING!
Do not use volatile solvents for cleaning purposes.
Many are potentially flammable, and if used in closed
areas they may cause respiratory harm.
Seat Belt Maintenance
Do not bleach, dye or clean the belts with chemical sol-
vents or abrasive cleaners. This will weaken the fabric.
Sun damage can also weaken the fabric.
If the belts need cleaning, use a mild soap solution or
lukewarm water. Do not remove the belts from the
vehicle to wash them. Dry with a soft cloth.
Replace the belts if they appear frayed or worn or if the
buckles do not work properly.
WARNING!
A frayed or torn seat belt could rip apart in a collision
and leave you with no protection. Inspect the seat
belt system periodically, checking for cuts, frays, or
loose parts. Damaged parts must be replaced imme-
diately. Do not disassemble or modify the seat belt
system. If your vehicle is involved in a collision, or if
(Continued)
Advertisement
Table of Contents
