Jeep WRANGLER 2024 Owner's Manual page 214

Table of Contents

Advertisement

212
MULTIMEDIA
Doors & Locks
When the Doors & Locks button is pressed on the touchscreen, the system displays the options related to locking and unlocking the vehicle's doors.
NOTE:
Depending on the vehicle's options, feature settings may vary.
Auto Door Locks
Auto Unlock On Exit
Flash Lights With Lock
Sound Horn With Lock
Sound Horn With Remote Start
1st Press Of Key Fob Unlocks
Passive Entry
Setting Name
This setting will allow you to change if the doors lock automatically when the vehicle
reaches 15 mph (24 km/h).
This setting will unlock the doors when any of the doors are opened from the inside.
This setting will allow you to turn the flashing of the lights when the Lock button is
pushed on the key fob on or off.
This setting will sound the horn when the Lock button is pushed on the key fob. The
"Off" setting will not sound the horn when the Lock button is pushed. The "1st Press"
setting will sound the horn when the Lock button is pushed once. The "2nd Press" set-
ting will sound the horn when the Lock button is pushed twice.
This setting will sound the horn when the remote start is activated from the key fob.
This setting will change how many pushes of the Unlock button on the key fob are
needed to unlock all the doors. The "Driver Door" setting will only unlock the driver
door on the first push on the Unlock button. The "All Doors" setting will unlock all
doors with only one push of the Unlock button.
This setting will allow you to turn the Passive Entry feature (Keyless Enter 'n Go™) on
or off.
Description

Advertisement

Table of Contents
loading

Table of Contents