Instrument Cluster Display Selectable Items - Jeep WRANGLER 2024 Owner's Manual

INSTRUMENT CLUSTER DISPLAY
SELECTABLE ITEMS
The instrument cluster display can be used to view the
following main menu items:
NOTE:
Depending on the vehicles options, feature settings
may vary.
Driver Assist —
Speedometer Stop/Start
If Equipped
Vehicle Info Fuel Economy
Off Road Trip Info Messages
Phone Call
Screen Setup Status —
If Equipped
NOTE:
The instrument cluster menu items display in the center
of the instrument cluster. Menu items may vary depend-
ing on your vehicle features.
Speedometer
Push and release the up or down
until the speedometer menu icon is displayed in the
instrument cluster display. Push and release the OK
button to toggle between MPH and km/h.
Vehicle Info
Push and release the up
until the Vehicle Info menu icon is displayed in the
instrument cluster display. Push and release the left
or right
mation submenus and push and release the OK button
to select or reset the resettable submenus.
Tire Pressure
Audio
Oil Temperature
Battery Voltage
Off Road
Push and release the up
until the Off Road menu icon is displayed in the instru-
ment cluster display. Push and release the left
right
arrow button to scroll through the information
arrow button
submenus.
•
Drivetrain
○
Front Wheel Angle: displays the graphical and
numerical value of calculated average front
wheel angle from the steering wheel orientation.
○
Transfer Case Lock Status: displays "Lock"
graphic only during 4WD High, 4WD High Part
Time, 4WD Low status.
or down
arrow button
arrow button to scroll through the infor-
Transmission
Temperature —
Coolant
Automatic
Temperature
Transmission
Only
Oil Pressure Oil Life
Single Gauge Critical Level
Submenu — Logic —
If Equipped If Equipped
or down
arrow button
or
GETTING TO KNOW YOUR INSTRUMENT PANEL
○
Axle Lock And Sway Bar Status (If Equipped): dis-
plays front and rear or rear only axle locker
graphic, and sway bar connection graphic with
text message (connected or disconnected).
•
Pitch And Roll
○
Displays the pitch and roll of the vehicle in the
graphic with the angle number on the screen.
NOTE:
When vehicle speed becomes too high to display the
pitch and roll, "- -" will display in place of the numbers,
and the graphic will be greyed out. A message indicat-
ing the necessary speed for the feature to become
available will also display.
Driver Assist — If Equipped
The Driver Assist menu displays the status of the ACC
systems.
Push and release the up or down
until the Driver Assist menu is displayed in the instru-
ment cluster display.
Adaptive Cruise Control (ACC) Feature — If Equipped
The instrument cluster display displays the current ACC
system settings. The information displayed depends on
ACC system status.
Push the ACC ON/OFF button (located on the steering
wheel) until one of the following displays in the instru-
ment cluster display:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read "Adaptive
Cruise Control Off."
129
3
arrow button