Engine Fluids And Lubricants - Jeep WRANGLER 2024 Owner's Manual

346 TECHNICAL SPECIFICATIONS

ENGINE FLUIDS AND LUBRICANTS

Engine Coolant
Intercooler
Battery, and Power Electric Coolant
Engine Oil — 2.0L Engine
Engine Oil — 3.6L Engine
Engine Oil — 6.4L Engine
Fuel Selection — 2.0L Engine
Fuel Selection — 3.6L Engine
Fuel Selection — 6.4L Engine
Component Fluid, Lubricant, or Genuine Part
We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile
(240,000 km) Formula OAT (Organic Additive Technology) or equivalent meeting the
requirements of the manufacturer Material Standard MS.90032.
We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile
(240,000 km) Formula OAT (Organic Additive Technology) or equivalent meeting the
requirements of the manufacturer Material Standard MS.90032.
We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile
(240,000 km) Formula OAT (Organic Additive Technology) or equivalent meeting the
requirements of the manufacturer Material Standard MS.90032.
We recommend using Mopar® API SP/GF-6A Certified SAE 5W-30 Full Synthetic
Engine Oil which meets the requirements of the manufacturer Material Standard
MS-13340. Equivalent full synthetic 5W-30 API SP engine oil can be used but must
have the API Donut trademark page 293.
Failure to use the recommended API SP/GF-6A or equivalent oil can cause engine
damage not covered by the vehicle warranty.
We recommend using Mopar® SAE 0W-20 Full Synthetic Engine Oil which meets the
requirements of the manufacturer Material Standard MS-6395. Equivalent full syn-
thetic SAE 0W-20 engine oil can be used but must have the API Starburst trademark
page 293.
We recommend using Mopar® API Certified SAE 0W-40 Full Synthetic Engine Oil which
meets the requirements of the manufacturer Material Standard MS-A0921. Equivalent
full synthetic SAE 0W-40 engine oil can be used but must have the API Donut trade-
mark page 293.
87 Octane (R+M)/2 Method, 0-15% Ethanol.
87 Octane (R+M)/2 Method, 0-15% Ethanol.
Premium Unleaded 91 Octane Only or Higher (R+M)/2 Method, 0-15% Ethanol (Do Not
Use E-85).
CAUTION!