Jeep WRANGLER 2024 Owner's Manual page 208

206 MULTIMEDIA
Safety/Driving Assistance
When the Safety/Driving Assistance button is pressed on the touchscreen, the system displays the options related to the vehicle's safety settings. These options will differ
depending on the features equipped on the vehicle. The settings may display in list form or within subfolders on the screen. To access a subfolder, select the desired folder; the
available options related to that feature will then display on the screen.
NOTE:
Depending on the vehicle's options, feature settings may vary.
Forward Collision Warning — Located In Automatic Emergency Braking Submenu
Forward Collision Warning Sensitivity — Located In Automatic Emergency Braking
Submenu
Active Driving Assist Steering Wheel Vibration
ParkSense
Front ParkSense Volume
Rear ParkSense Volume
Rear ParkSense Braking Assist
Blind Spot Alert
Traffic Sign Recognition
Traffic Sign Assist
Setting Name
This setting will turn the Forward Collision Warning (FCW) system on or off. The "Off"
setting will deactivate the FCW system. The "Warning Only" setting will provide only an
audible chime when a collision is detected. The "Warning + Active Braking" setting will
provide an audible chime and apply some brake pressure when a collision is detected.
This setting will change the distance at which the Forward Collision Warning alert
sounds. The "Medium" setting will have the FCW system signal when an object is in
view, and the possibility of a collision is detected. The "Near" setting will have the FCW
system signal when the object is closer to the vehicle. The "Far" setting will have the
FCW system signal when an object is at a far distance from the vehicle.
This setting will turn the Active Driving Assist Steering Wheel Vibration on or off.
This setting will change the type of ParkSense alert when a close object is detected
and can provide both an audible chime and a visual display.
This setting adjusts the volume of the Front ParkSense system. The available settings
are "Low", "Medium", and "High".
This setting adjusts the volume of the Rear ParkSense system. The available settings
are "Low", "Medium", and "High".
This setting will provide braking assistance if the Rear ParkSense system senses a
collision with an object.
This setting will change the type of alert provided when an object is detected in the
vehicle's blind spot. The "Off" setting will turn off Blind Spot Alert. The "Lights" setting
will activate the Blind Spot Alert lights on the outside mirrors. The "Lights & Chime"
setting will activate both the lights on the outside mirrors and an audible chime.
This setting will turn Traffic Sign Recognition on or off.
This setting will turn Traffic Sign Assist on or off.
Description