Jeep WRANGLER 2024 Owner's Manual page 132

Table of Contents

Advertisement

130
GETTING TO KNOW YOUR INSTRUMENT PANEL
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed setting
has not been selected, the display will read "Adaptive
Cruise Control Ready."
Push the SET + or the SET - button (located on the
steering wheel), and the following will display in the
instrument cluster display.
ACC SET
When ACC is set, the set speed will display in the instru-
ment cluster.
The ACC screen may display once again if any of the
following ACC activity occurs:
System Cancel
Driver Override
System Off
ACC Proximity Warning
ACC Unavailable Warning
NOTE:
The instrument cluster display will return to the last
display selected after five seconds of no ACC display
activity
page 173.
Fuel Economy
Push and release the up
or down
until the Fuel Economy icon is highlighted in the instru-
ment cluster display. Push and hold the OK button to
reset average fuel economy feature.
Toggle left
or right
to select a display with or
without Current Fuel Economy Information.
Range – The display shows the estimated distance
(mi or km) that can be traveled with the fuel remain-
ing in the tank. When the Range value is less than
10 miles (16 kilometers), the Range display will
change to a "LOW" message. Adding a significant
amount of fuel to the vehicle will turn off the "LOW"
message and a new Range value will display. Range
cannot be reset through the OK button.
NOTE:
Significant changes in driving style or vehicle load-
ing will greatly affect the actual drivable distance of
the vehicle, regardless of the Range displayed value.
Average – The display shows the average fuel
economy (MPG, L/100 km, or km/L) since the last
reset.
Current – This display shows the current fuel
economy (MPG, L/100 km, km/L) while driving.
Energy Economy — If Equipped
Push and release the up
until Energy Economy is highlighted in the instrument
cluster display. Push the left
ton to scroll through the following information
submenus:
Average Energy Economy gauge + value (hold OK to
reset)
Current Energy Economy gauge + value
Total Range
arrow button
Hybrid Info
Push and release the up
until Hybrid Info is highlighted in the instrument cluster
display. Push the left
scroll through the following information submenus:
Range to Empty
Electric Range
Hybrid Range
Total Range
Efficiency Coach
Efficiency Coach will monitor your current driving to
help you drive as efficient as possible.
or down
arrow button
or right
arrow but-
or down
arrow button
or right
arrow button to
"Accel" is based on amount of acceleration (Differ-
ent from MPG).
The gauge will only move up when accelerator
pedal is pushed (or accelerating with Cruise Con-
trol or ACC).
Above a certain rate of change will be considered
inefficient.
The color of the gauge bar will change from green
to yellow to orange.
"Brake" is based on amount of deceleration (slow-
ing down).
The gauge will only move down when brake pedal is
pushed (or decelerating with Cruise Control or ACC).
The color of the gauge bar will change from green
to yellow to orange.
The gauge bar color will transition smoothly up and
down, and have a gradual change based on efficiency.
Center of gauge is 0% Accel and 0% Brake.
+/-0-35% of gauge fills green, +/-36-80% yellow,
and +/-81-100% orange (with a blend between
each color).
Efficiency Coach Gauge

Advertisement

Table of Contents
loading

Table of Contents