Hybrid Electric Pages - Jeep WRANGLER 2024 Owner's Manual

Table of Contents

Advertisement

28
GETTING TO KNOW YOUR VEHICLE
Instrument Panel State Of Charge Indicator
In addition to the battery display in the instrument clus-
ter, your vehicle is equipped with a visual SOC indicator.
The SOC indicator is made up of four lights that are
mounted to the top center of the instrument panel,
which will illuminate when the vehicle is plugged into
the charging system.
State Of Charge Indicator
The SOC indicator provides a visual indication of the
high voltage battery's charge status during charging. It
is also used to indicate a charging problem as well as
waiting for a scheduled charge to begin.
NOTE:
The lights scroll one at a time when the vehicle is
plugged in outside of its charging schedule time/day
of the week, and it is waiting on the schedule to
begin charging.
In extreme hot or cold environments, the lights on
the SOC indicator may not illuminate. Charge status
is available in the instrument cluster display. In the
event of an error in the charging process, the outer
two lights will blink.
When the hood is open, the lights on the SOC indi-
cator will not be illuminated.
Number Of Indicator
Percent Of Battery
Lights Illuminated
1st light blinks
1st light on, 2nd light
26 – 50%
blinks
1st and 2nd lights on,
51 – 75%
3rd light blinks
1st, 2nd, and 3rd lights
76 – 99%
on, 4th light blinks
All four lights on
Two outer lights are
Indicates an error in the
blinking
charging process
Lights turn on one at a
Indicates system is waiting
time from left to right
for scheduled time in
(when looking at the
charge schedule to begin
front of the vehicle)
All lights turn on, then
Indicates a successful
immediately turn off
NOTE:
For each segment of lights illuminated indicating the
percent of battery charge, two different blink rates are
used. A blink rate of 1 second on/1 second off indi-
cates that the first half is charging. The blink rate will
increase to 0.5 second on/0.5 second off to indicate
that the second half is charging. When the battery is
fully charged, the blinking stops and the lights remain
illuminated as charging continues.
Next to the charging inlet, there is an LED that changes
color based on charging status.
Charge
0 – 25%
100%
LED Light Color
Blue
Flashing Green
charging
Solid Green
plug-in
Blinking Red

HYBRID ELECTRIC PAGES

Within your Uconnect system is the Hybrid Electric App
that allows you to see your vehicle's power flow, under-
stand your driving history, and set a charging schedule
for your vehicle's high voltage battery. To access this
app, press the Apps button on the main menu bar of
the radio's touchscreen, and locate the Hybrid Electric
App. Pressing the app icon brings you to a set of hybrid
electric pages: Power Flow, Driving History, Charging
Schedule, e-Save, and Charge Settings (if equipped).
Charging Inlet LED Location
LED Charging Inlet
Status
Indicates that the system is wait-
ing for a scheduled recharge.
Charging process in place.
Indicates the vehicle is fully
charged.
Indicates a fault in the charging
system.

Advertisement

Table of Contents
loading

Table of Contents