Table of Contents
Advertisement
5. Once the power top has stopped in the fully closed
position, release the close button. The power top is
now reset and ready to use.
NOTE:
If the close button is released anytime during the
relearning process, the relearn may not be complete,
and the procedure must be repeated.
Rear Quarter Window Removal
On vehicles equipped with a Power Sliding Top, the rear
quarter windows can be removed. To remove these win-
dows, follow this procedure:
1. Open the swing gate, and lift the rear window.
2. Open both side doors nearest the quarter windows.
3. Locate the rear quarter window latches (two on each
window) on the interior of the windows.
4. Rotate the left hand side latch clockwise to release.
5. Rotate the right hand side latch counterclockwise to
release.
Step Five
1 — Rotate Left Handle Clockwise
2 — Rotate Right Handle Counterclockwise
6. From the outside of the vehicle, lift each window
upward and away from the vehicle.
NOTE:
Do not pull down or apply any weight to the windows
after the latches are released. Damage could result
to the pins holding the windows in place.
Step Six
Step Six
7. Store the rear quarter windows in the provided stor-
age bag and keep in a safe location, or securely fas-
ten the bag to the rear seat.
GETTING TO KNOW YOUR VEHICLE
Quarter Window Storage Bag
To use the storage bags for the rear quarter windows,
proceed as follows:
1. With the bag completely open and the fabric divider
raised, place the first quarter window with the
latches facing outward into the foam insert. Fold
divider over the window once placed inside.
Step One
1 — Bag Open With Divider Raised
2 — Lower Divider Over Window
(Latches Facing Outward)
2. Place the second window into the foam insert with
the latches facing outward. Fully close the bag.
NOTE:
Once both windows are placed inside the bag, the
outside of the windows will be facing each other
with all latches facing the outside of the bag.
109
2
Advertisement
Table of Contents
