Figure 46. Removing the M.2 backplane from the air baffle
a.
Unfasten the screw that secures the M.2 backplane to the air baffle.
b.
Slide and hold the retention clip on the air baffle.
c.
Remove the M.2 backplane from the air baffle, and release the retention clip.
After you finish
1. Install a new M.2 backplane. See
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install the M.2 backplane
Follow instructions in this section to install the M.2 backplane.
About this task
Attention:
• Read
"Installation Guidelines" on page 39
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Firmware and driver download: You might need to update the firmware or driver after replacing a
component.
• Go to
https://datacentersupport.lenovo.com/tw/en/products/servers/thinksystem/sr665v3/7d9a/downloads/
to see the latest firmware and driver updates for your server.
driver-list/
• Go to
"Update the firmware" on page 189
Watch the procedure
A video of this procedure is available at YouTube:
DR4X1YAcp9wFKhwj_tLQ5Y
ThinkSystem SR665 V3 User Guide
88
"Install the M.2 backplane" on page
and
"Safety inspection checklist" on page 40
48.
for more information on firmware updating tools.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
88.
to ensure that you