Switches, Jumpers, And Buttons - Lenovo ThinkSystem SR860 Maintenance Manual

Switches, jumpers, and buttons

The following illustrations show the location of the switches, jumpers, and buttons on the server.
Note: If there is a clear protective sticker on the top of the switch block, you must remove and discard it to
access the switch.
Figure 13. Switches, jumpers and buttons
Table 9. System-board switches, jumpers, and buttons
1
J20
2
Light path button
Press this button to light the LEDs on the system board
when the power source has been removed from the
server.
The following table describes the functions of the SW13 switch block on the system board.
The following table describes the functions of the SW613 switch block on the system board.
Table 10. System-board SW13 switch block descriptions
Switch number Default position
1 Off
3
Switch block (SW13)
See Table 10 "System-board SW13 switch block
descriptions" on page 25 for more details.
Off
Host TPM Physical Presence
disable
On
Host TPM Physical Presence
enable
.
Chapter 2 Server components
25