Use The Sysmac Studio To Set The Tag Data Links (Ethernet/Ip Connections; A-2-1 Overview Of The Tag Data Links (Ethernet/Ip Connections) Settings With The Sysmac Studio; Overview Of The Tag Data Links (Ethernet/Ip Connections) Settings With The Sysmac Studio - Omron sysmac NX102-9 Series Owner's Manual

A-2 Use the Sysmac Studio to Set the Tag
Data Links (EtherNet/IP Connections)
A-2-1 Overview of the Tag Data Links (EtherNet/IP Connections)
Settings with the Sysmac Studio
You can use the Sysmac Studio to set the settings required for creating tag data links (EtherNet/IP con-
*1
nections) between NJ/NX-series Controllers.
*1 The tag data links and EtherNet/IP connections enable cyclic tag data exchanges on an EtherNet/IP network
between Controllers or between Controllers and other devices. Here, "EtherNet/IP connection" refers to both
the tag data links and the EtherNet/IP connections.
Version Information
Sysmac Studio version 1.10 or higher is required to use the Tag Data Link (EtherNet/IP Connec-
tion) Settings.
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
Appendices
A
A-5