Omron sysmac NX102-9 Series Owner's Manual page 507

Precautions for Correct Use Precautions for Correct Use
Any name can be specified for the tag set if the name matches one of the registered network
variable names in the Controller.
As you enter characters (or immediately after you press the Ctrl + Space Keys), the Sysmac Stu-
dio Entry Assistance provides a list of variable names registered in the Controller. Select the
variable name from the list.
Additional Information
You can register up to 8 tags in a tag set.
Set as shown below to register multiple tags.
Example:
Tag set name
 Network_Input_Value
Net_In1
Net_In2
6
Register all tags and tag sets at the same time.
(1) Right-click anywhere on the Input Tab Page of the EtherNet/IP Connection Settings
Tab Page and select Register All Tag Sets or click the Registration All Button to dis-
play the Tag Set Registration Setting Dialog Box.
This dialog box lists the variables that are registered in the Global Variable Table and also
have the Network Publish attribute set to Input or Output.
(2) Select the variable to register as a tag, and then click the Register Button.
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
.... (Tag set name)
.... (Tag name)
.... (Tag name)
Appendices
A
A-17