Creating Connections Using The Wizard - Omron sysmac NX102-9 Series Owner's Manual

7-2-6

Creating Connections Using the Wizard

You can use the Network Configurator's Wizard to easily create connections between OMRON PLCs
following the instructions provided by the Wizard.
Note The Wizard can be used only with the following OMRON EtherNet/IP devices.
Device name
CJ1W-EIP21(NJ)
CJ1W-EIP21
CJ1W-EIP21(CJ2)
CJ2B-EIP21
CJ2M-EIP21
CS1W-EIP21
NX701
NX102-
NX1P2
NJ301-
NJ501-
NJ101
Use the following procedure to create connections (i.e., data links) with the Wizard.
1
Set tags and tag sets for all devices before starting the Wizard. Refer to 7-2-4 Creating Tags
and Tag Sets for the setting procedure.
2
For tag data links between OMRON PLCs, a connection is created in the PLC (i.e., the origina-
tor device) that receives data as input data.
First, select the registered device for which you want to create a connection in the Network Con-
figuration Window of the Network Configurator, and then select Device - Parameters - Wizard
from the menus.
The following dialog box will be displayed before the Wizard starts.
Click the Yes Button to delete the connections that have been set with OMRON PLCs before
starting the Wizard.
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
Remarks
CJ1W-EIP21 mounted to NJ-series Controller
CJ1W-EIP21 mounted to CJ1 CPU Unit
CJ1W-EIP21 mounted to CJ2 CPU Unit
Built-in EtherNet/IP port in CJ2H CPU Unit
Built-in EtherNet/IP port in CJ2M CPU Unit
CJ1W-EIP21 mounted to CS1 CPU Unit
Built-in EtherNet/IP port on NX-series CPU Unit
Built-in EtherNet/IP port on NJ-series CPU Unit
7 Tag Data Link Functions
7
7-47