11-6 Using SD Memory Card Operations
The built-in EtherNet/IP port can be used to upload and download the following data between the SD
Memory Card and the FTP server.
• Variables files (binary format)
The following three methods are used by the CPU Unit to store and read data on the SD Memory Card.
1) Creating and reading files
from the Sysmac Studio
2) File operations from Windows
11-6-1 SD Memory Card Types
Use the SD or SDHC Memory Card that is specified below. Operation may not be dependable if
another SD or SDHC Memory Card is used.
Model number
HMC-SD291
HMC-SD491
*1
HMC-SD1A1
*1 This can be used on the following CPU Units.
• The NX102- CPU Units with unit version 1.32 or later
• The NX1P2-, NJ501-100, NJ301-, and NJ101-00 CPU Units with unit version 1.21 or
later
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
Sysmac Studio
SD Memory Card
Card type
Capacity [GB]
SD
2
SDHC
4
SDHC
16
NJ/NX-series CPU Units
3) Reading and writing variable files with
SD Memory Card instructions
Uploading data to or downloading
data from the FTP server
Format
FAT16
FAT32
FAT32
11 FTP Server
Number of
Weight
overwrites
100,000 writes
2 g max.
11
11-15