Connection Procedure; Overview Of Setting Tag Data Links - Omron NJ Series Network Connection Manual

7. Connection Procedure

This section describes the procedure for connecting the Controller on the EtherNet/IP network
using the "procedure for using configuration files".
This document explains the setting procedure of the Controller and the Displacement Sensor
with their default settings. For information on how to initialize each device, refer to Section 8
Initialization Method.

7.1. Overview of Setting Tag Data Links

The following figure shows the relationship between the processes to operate the tag data
links using the "procedure for using configuration files".
Configuration files
Sysmac Studio project file
Importing
project file
Sysmac Studio
Transferring
project data
Precautions for Correct Use
Prepare the latest "Sysmac Studio project file" and "Network Configurator v3 network
configuration file" from OMRON in advance.
(To obtain the file, contact your OMRON representative.)
Personal computer
Transferring tag
data link parameters
Controller
7. Connection Procedure
Network Configurator version 3
network configuration file
Opening network
configuration file
Network Configurator
Destination
device
17