Application Example From A Host Computer - Omron sysmac NX102-9 Series Owner's Manual

11 FTP Server
11-7 Application Example from a Host
Computer
The following procedure provides an example of FTP operations from a host computer. In this example,
the following assumptions are made.
• The IP address of the built-in EtherNet/IP port is registered in the hosts as host name [nj].
• The FTP login name is "LogIn".
• Manufacturing results is stored in the SD Memory Card in the CPU Unit in a file that is named
RESULT.BIN.
• A processing instructions data file called PLAN.BIN already exists on the workstation.
In the following procedure, the manufacturing results file (RESULT.BIN) in the SD Memory Card in the
CPU Unit is transferred to a workstation, and then a manufacturing instructions file (PLAN.BIN) on the
workstation is transferred to the SD Memory Card in the CPU Unit. Underlined text is keyed in from the
FTP client. The workstation prompt is indicated as $ and the cursor is indicated as .
1
Start the FTP application and connect to the built-in EtherNet/IP port.
$ ftp nj
connected to nj
220 **IPaddress** NJ501-1300 FTP server(FTP**version**)ready
Name(nj:root):
2
Enter the login name.
Name(nj:root):LogIn
331 Password required for LogIn.
Password:
230 LogIn logged in.
ftp>
3
Make sure the Memory Card is correctly inserted. The MEMCARD1 directory is displayed if
there is an SD Memory Card in the CPU Unit.
ftp> ls
200 PORT command successful.
150 opening data connection for ls(**IPaddress**port#**)(0 bytes).
MEMCARD1
226 Transfer complete.
15 bytes received in 0 seconds(**bytes/s)
ftp>
4
Change to the MEMCARD1 directory.
ftp> cd MEMCARD1
250 CWD command successful.
ftp>
5
Change data type to binary.
ftp> type binary
200 Type set to I.
ftp>
11-18
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
FTP started.
Enter the login name.
Enter the password.
Make sure the Memory
Card is inserted.
Change the directory.
Set binary data type.