Omron sysmac NX102-9 Series Owner's Manual page 325

General
status
code (hex)
15
1F
20
Get Current User Error (Service Code: 3E hex)
Obtain the user-defined errors of the Controller.
 Request Data Format
Parameter name
Service
Request Path Size
Request Path
Unit No
Start number of read record
Number of read record
 Response Data Format
When the processing is successful
Parameter name
Reply Service
Reserved
General Status
Size of Additional Status
Error update count
Record size
Number of registered record
Number of readout record
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
Error name
Too much data
Vendor specific error
Invalid parameter
USINT
USINT
Padded EPATH
UINT
UINT
UINT
USINT
USINT
USINT
USINT
UINT
UINT
UINT
UINT
8 CIP Message Communications
Extra data for the execution of the required service is
included.
The service could not be executed due to internal reasons.
• The Unit number is out of the supported range.
• The Unit does not exist.
Data type
Get current user error service: 3E hex
Size of Request Path: 02 hex
Request path: 2074 2401 hex
Class ID: 74 hex
Instance ID: 01 hex
Unit number
0000 hex: Controller
0001 hex or above: Not supported
Top number of read record
Number of read records (0 to 5)
When the registered number of records is smaller
than the number of read records, an error does
not occur, and all the registered event logs are
read.
Data type
Get current user error service response: BE hex
Reserved: 00 hex
Code indicating normal: 00 hex
Size of Additional Status: 00 hex
Abnormal total count value
Size of one record (Byte):0060 hex
Number of registered records
Number of readout records
Cause
Description
Description
8
8-69