Table of Contents
Advertisement
Auto/manual/snapshot datalogging
The instrument has three datalog types:
Auto
Default mode. Collects datalog information when the instrument is sampling.
Datalogging occurs only when the instrument's datalogging is manually started (See "Manual datalog" on
Manual
page 84 for more information.)
Datalogs only during snapshot (single-event capture, initiated by pressing [MODE]) sampling. See "Snapshot
Snapshot
datalog" on page 84 for more information.
Note: You can only choose one datalog type to be active at a time.
Handheld PID Monitors
52
User Manual
Advertisement
Table of Contents
