Table of Contents
Advertisement
5 User Access
5.2 Working with HMI
5.2.4.3 Auto set date and time
At regular intervals, the date and time information for the ERX350 device is logged in audit logs.
Whenever there is a power reboot, the device retains the date and time from the last saved audit log.
If the device retains the date and time from the audit log, the HMI display shows as FIX Date and TIME.
Click FIX Date and TIME to sync the date and time manually through the Masterlink. (or)
l
The device automatically syncs with the server on the next successful Call In.
l
5.2.5 Selecting the Unit of Measure
Using ERX350 you can select the unit of measurement for pressure, and temperature.
Selecting the Unit of Measurement for Pressure
l
Selecting the Unit of Measurement for Temperature
l
5.2.5.1 Selecting the Unit of Measurement for Pressure
To select the unit of measurement for pressure:
1. Unlock the keypad and type the PASSCODE to enter level 2 mode or level 3 mode. Refer to the
section "Accessing Level 2 Mode " for accessing level 2 mode or section " Accessing Level 3 Mode "
for accessing level 3 mode.
2. By default, in level 2 mode or level 3 mode the following appears on the display.
MAIN MENU
ALARMS
3. Using the UP arrow and DOWN arrow scroll through the options in level 2 mode or level 3 mode
until CONFIG appears.
4. Press OK. The following appears on the display.
CONFIG ALARMS
5. Using the UP arrow and DOWN arrow scroll through the options in level 2 mode or level 3 mode
until PRESSURE appears.
6. Press OK.
By default, the following appears on the display. PRESSURE
GAS PRESS
Honeywell
2023
105
Advertisement
Table of Contents
