Ultrarae 3000 - Honeywell MiniRAE 3000+ User Manual

UltraRAE 3000+

The UltraRAE is actually two monitors in one:
Compound-specific monitor
l
VOC monitor
l
As a compound-specific monitor, it takes timed measurements and uses a separation tube in
conjunction with software that enables the UltraRAE 3000+ to give specific readings on one
particular type of compound, such as benzene or butadiene.
As a VOC monitor, the UltraRAE 3000+ operates in different modes. In some cases, you can
change modes using a password and using the instrument's navigation. In other cases, you
must use Safety Suite Device Configurator (SSDC) software.
The following two sections cover operation in the two modes.
See "UltraRAE 3000+ operation" on page 40 for more information.
l
See "VOC operation - UltraRAE3000+" on page 47 for more information.
l
The next diagram shows the basic flow of the UltraRAE 3000+'s functions. The area with the
gray field is the compound-specific (tube) mode, while the rest shows VOC mode. Navigate
through the steps by using the [Y/+] and [N/-] keys as shown in the diagram.
Note: If you use a password to access Programming Mode (See "Programming mode" on
page 68 for more information.), then the navigation changes slightly, entering part of Advanced
Hygiene Mode's settings (See "Advanced user level" on page 95 for more information.).
Note: Dashed line indicates automatic progression.
Handheld PID Monitors
Compound-Specific (Tube)
38 User Manual