Display
The display shows the following information:
NO.
1
Reading
2
Gas info
3
Y/+ key
4
MODE key
5
N/- key
6
Pump
7
Datalog
8
Battery
9
Radio signal
10
Radio power
11
Calibration needed
Calibration (or bump) needed
(not shown)
LoRa connectivity icon (not
shown)
Note:The "Radio power" icon and "Radio signal" icon are only shown if a Mesh radio is installed
in the instrument. If the instrument has a BLE radio, the Bluetooth icons shown on the next
page are used.
Handheld PID Monitors
Item
Concentration of gas as measured by the instrument
Tells the Correction Factor and type of calibration gas
Y/+ key's function for this screen
MODE key's function for this screen
N/- key's function for this screen
Indicates that pump is working
Indicates whether datalog is on or off
Indicates level in 3 bars
Indicates signal strength (more bars = greater strength)
Indicates whether Mesh radio connection is on or off
Indicates that calibration should be performed
Dark icon indicates that calibration should be performed; light icon indicates
bump should be performed
LoRa connectivity icon ( ) when available in the instrument
Description
24
User Manual