Read Before Operating - Honeywell MiniRAE 3000+ User Manual

Read before operating

This manual must be carefully read by all individuals who have or will have the responsibility of
using, maintaining, or servicing this product. The product will perform as designed only if it is
used, maintained, and serviced in accordance with the manufacturer's instructions. The user
should understand how to set the correct parameters and interpret the obtained results.
To reduce the risk of electric shock, turn the power off before opening this instrument
or performing service. Never operate the instrument when the instrument is open.
Service this product only in an area known to be non-hazardous.
ATEX: To reduce the risk of electrostatic ignition, do not use the instrument without
the rubber boot in place.
STATIC HAZARD: Clean only with a damp cloth.
For safety reasons, this equipment must be operated and serviced by qualified
personnel only. Read and understand instruction manual completely before operating
or servicing.
USE ONLY RAE SYSTEMS BY HONEYWELL BATTERY PACKS, PART NUMBERS 059-
3051-000, 059-3052-000, AND 059-3054-000. THIS INSTRUMENT HAS NOT BEEN
TESTED IN AN EXPLOSIVE GAS/AIR ATMOSPHERE HAVING AN OXYGEN
CONCENTRATION GREATER THAN 21%. SUBSTITUTION OF COMPONENTS MAY
IMPAIR INTRINSIC SAFETY. RECHARGE BATTERIES ONLY IN NON-HAZARDOUS
LOCATIONS.
DO NOT MIX OLD AND NEW BATTERIES OR BATTERIES FROM DIFFERENT
MANUFACTURERS.
THE CALIBRATION OF ALL NEWLY PURCHASED HONEYWELL INSTRUMENTS
SHOULD BE TESTED BY EXPOSING THE SENSOR(S) TO KNOWN CONCENTRATION
CALIBRATION GAS BEFORE THE INSTRUMENT IS PUT INTO SERVICE.
FOR MAXIMUM SAFETY, THE ACCURACY OF THE INSTRUMENT SHOULD BE
CHECKED BY EXPOSING IT TO A KNOWN CONCENTRATION CALIBRATION GAS
BEFORE EACH DAY'S USE.
DO NOT USE USB/PC COMMUNICATION IN HAZARDOUS LOCATIONS.
Handheld PID Monitors
CAUTION
WARNING
10 User Manual