Honeywell MiniRAE 3000+ User Manual page 84

Datalog type
The instrument has three datalog types:
Auto Default mode. Collects datalog information when the instrument is sampling.
Manual Datalogging occurs only when the instrument's datalogging is manually started (see below for details).
Snapshot Datalogs only during single-event capture sampling.
Note: You can only choose one datalog type to be active at a time.
1. Press [N/-] to step from one option to the next.
2. Press [Y/+] to make your selection (the dark circle in the "radio button" indicates "on").
3. When you have completed your selection, press [MODE].
You will see two choices: Save and Undo. You can register the new settings or to change your
mind and revert to your previous settings.
Press [Y/+] to save the changes.
l
Press [N/-] to undo the changes and revert to the previous settings.
l
Manual datalog
When the instrument is set to Manual Datalog, you turn datalogging on and off by stepping
through the displays from the Main Display, and then pressing the keys to select datalog on/off
functions.
When you reach the screen that says "Start Datalog?" press [Y/+] to start it. You see "Datalog
l
Started," confirming that datalogging is now on.
When you reach the screen that says "Stop Datalog?" press [Y/+] to stop it. You see "Datalog
l
Stopped," confirming that datalogging is now off.
Snapshot datalog
When the instrument is in Snapshot datalogging mode, it captures a single "snapshot" of the
data at the moment of your choosing. Whenever the instrument is on and it is set to Snapshot,
all you have to do is press [MODE] each time you want to capture a snapshot of the data at that
instant.
When you send the data to a computer using Safety Suite Device Configurator (SSDC), the data
snapshots are uniquely identified by time and other parameters.
Handheld PID Monitors 84 User Manual