Setting Policy Enforcement - Honeywell MiniRAE 3000+ User Manual

Setting policy enforcement

You must use Safety Suite Device Configurator (SSDC) to make changes to Policy Enforcement
settings. You must use an AutoRAE 2 Cradle, a Travel Charger, or a Charging cradle. Policy
violations are captured in the datalog.
Using the travel charger, Charging cradle, or AutoRAE 2 automatic test and
calibration system
To program an instrument via an AutoRAE 2, you need Safety Suite Device Configurator (SSDC),
the AutoRAE 2 connected to a power source, and a USB PC communications cable.
1. Connect a USB cable between a PC with Safety Suite Device Configurator (SSDC) and the
AutoRAE 2 Cradle, Travel Charger, or Charging cradle.
2. Apply power to the AutoRAE 2 Cradle, Travel Charger, or Charging cradle.
3. Turn off the instrument (or put it into AutoRAE 2 Mode or Communication Mode) and set it
in the Charging cradle.
4. Start Safety Suite Device Configurator (SSDC) software on the PC. Enter a username and
password (the default administrator username is "administrator" and the password is
"Default123").
5. The software will scan automatically for instruments.
6. The list of instruments will appear in the main screen along with their serial number.
In SSDC, the devices are shown, including their Serial Number, with the "Connected" icon:
Handheld PID Monitors 33 User Manual