Camera> <Conditions; Figure 7-5: Conditions - Fluke ThermoView TV30 Series User Manual

®
ThermoView TV30 Series
Users Manual, Rev. 1.0, May 2023
7.2.2 <Camera> <Conditions>
Condition is a state that must exists to activate a specific action.
Most of the process control logic is defined by conditions. Conditions are universal, they can be used in different
circumstances: alarm conditions, conditions that output temperature values and so on. The following conditions
are available:

Measurement
Conditions that use temperature measurements made on acquired infrared images

Combination
Combination of two conditions using logical operations
38

Figure 7-5: Conditions