Table of Contents
Advertisement
®
ThermoView
TV30 Series
Users Manual, Rev. 1.0, May 2023
8.1.8 PoE Injector Industrial (A-TV-POE2)
The PoE Injector Industrial (A-TV-POE2) is intended to use in industrial environments.
With PoE (Power over Ethernet), the injector transfers both data and electrical power to Ethernet-enabled devices
using a standard CAT5 cable. The injector injects up to 30 W for the attached device(s). It operates in a wide
temperature range between up to 75°C (167°F). The injector is DIN-rail or wall mountable.
Communications
Standard
LAN
Transmission Distance
Transmission Speed
Interface
Connectors
Power
Power Consumption
Power Input
Power Output
Environment
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
66
IEEE 802.3, 802.3u, 802.3x, 802.3af/at, 802.3ab
10/100/1000Base-T (X)
max. 100 m (328 ft)
up to 1000 Mbps
PoE OUT: RJ45, DATA IN: RJ45
6-pin removable screw terminal
max. 33.36 W @ 24 VDC (Full load PoE)
24 to 48 VDC, redundant dual power inputs
30 W @ 55 VDC
-40 to 75°C (-40 to 167°F)
-40 to 85°C (-40 to 185°F)
5 to 95% (non-condensing)
0 to 95% (non-condensing)
Advertisement
Table of Contents
